compustar 2w900fm as aux outputs
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118989
Printed Date: June 09, 2024 at 4:56 PM
Topic: compustar 2w900fm as aux outputs
Posted By: gres67gs
Subject: compustar 2w900fm as aux outputs
Date Posted: December 31, 2009 at 10:08 PM
Hi All Can anyone tell me what the wire color are for Aux 1 and Aux 2 on a CM 5000, I see programing is in option group 4 but I do not see any wire designation in the manual. Thanks. ------------- Frank G
Replies:
Posted By: tedmond
Date Posted: January 01, 2010 at 1:44 AM
aux 1 - WHITE (-) pin 15
aux 2 - VIOLET (-) pin 17 default settint is horn. so go into programming and change it for your application. ------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: gres67gs
Date Posted: January 01, 2010 at 5:16 PM
Thanks, I did notice that my remote does not show aux when I tap the button so I will need to change in programming I will assume. On programming, I know the buttons on the remote will give me access to the program groups are there any other things I need to do to get into programming (like ground hood pin or valet mode) ------------- Frank G
Posted By: tedmond
Date Posted: January 01, 2010 at 7:59 PM
no need for opeing up the hood, valet etc. just use the 2way remote and follow the sequence. The reason you are not gettting the AUX-01 on the remote, press button 4, then press button 2 in order to activate aux 1. this is just a preventative measure for accidental presses. you can disable this function in the menu.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: gres67gs
Date Posted: January 01, 2010 at 9:09 PM
Tedmond, hate to be a bother. but can programming thru remote be disabled with the op500, seams I can not get into any option groups using my 2 way
-------------
Frank G
Posted By: tedmond
Date Posted: January 02, 2010 at 7:16 AM
with the remotes, you should be able to access all menus and do simple changes. the only things you wont be able to change are the (POS) settings, thats where the OP500 comes into play. Make sure you hear clicks from the unit in between steps. once your in that specific menu, wai tto hear X amount of clicks to verify you are in the correct menu.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: gres67gs
Date Posted: January 02, 2010 at 6:39 PM
All is working good now, Thanks for the assistance.
-------------
Frank G
Posted By: dswift
Date Posted: January 05, 2010 at 4:36 PM
You need an OP500 to program your auxillaries.
-------------
"dont ground out!"
|