viper/dei vsm100/dsm100

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119187
Printed Date: May 15, 2024 at 10:12 PM

Topic: viper/dei vsm100/dsm100

Posted By: tastysuds
Subject: viper/dei vsm100/dsm100
Date Posted: January 08, 2010 at 7:36 PM

I am a retired installer and only work on friends and family vehicles. I just installed a viper 5501 starter (range not enough) and want to install the vsm100 or dsm100 in the car. Can I do this myself or will I need some type of contract or program to install it, or a bitwriter. Thanks in advance, you guys always come through... Bob

-------------
bob

Replies:

Posted By: mustangous
Date Posted: February 03, 2010 at 8:45 PM

tastysuds wrote:

I am a retired installer and only work on friends and family vehicles. I just installed a viper 5501 starter (range not enough) and want to install the vsm100 or dsm100 in the car. Can I do this myself or will I need some type of contract or program to install it, or a bitwriter. Thanks in advance, you guys always come through... Bob

I would like to know the same... Anyone with experience with this?

Posted By: zenica
Date Posted: October 13, 2010 at 5:15 PM

I would love to find the installation instructions as well as how to activate it since I am installing it myself. I figure if I can install the alarm, this should be within the realm of my capability.

Posted By: dodgeram10
Date Posted: October 13, 2010 at 8:28 PM

tastysuds wrote:

I am a retired installer and only work on friends and family vehicles. I just installed a viper 5501 starter (range not enough) and want to install the vsm100 or dsm100 in the car. Can I do this myself or will I need some type of contract or program to install it, or a bitwriter. Thanks in advance, you guys always come through... Bob

No program or bitwriter required . Very easy to install . You wont find install instructions since theres only a power , ground & data connection . They are meant to be installed by a authorized dei dealer .

You will need a authorized dei retailer to activate . There is No work around . If you cant get a shop that sells dei products to activate , its useless .