How To Get Out of Silent Mode 2 on Viper?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119204
Printed Date: May 29, 2024 at 6:08 AM
Topic: How To Get Out of Silent Mode 2 on Viper?
Posted By: gpspro
Subject: How To Get Out of Silent Mode 2 on Viper?
Date Posted: January 09, 2010 at 4:04 PM
Got a new Viper 5901 for about a month now and I couldn't be happier. Unfortunately, I just accidentally dropped my 2-way remote control on a ground yesterday and the back lid of it popped out but not fully off. So I just pushed it back to close it. Tested OK, everything seems to work great except that the siren response sounds really soft (I can't bearly hear it) at all to when I arm, disarm and worst of all, no sound when alarm goes off. It appears that the brain went into the Silent Mode 2 after it got dropped. I did try to restore the "Confirmation Chirps" feature to default, i.e. On w/Warn Chirps On, but it still didn't work. Tried my 1-way control too, same results.
I'm not sure where to go next to get out of this mode. Any help would be greatly appreciated.
Replies:
Posted By: t&t tech
Date Posted: January 10, 2010 at 10:27 AM
Silent mode 2? Sounds like a faulty siren issue to me!
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: gpspro
Date Posted: January 10, 2010 at 1:33 PM
Thanks man. I have the same feeling too.
Posted By: d4rkzone
Date Posted: July 27, 2010 at 11:41 AM
gpspro wrote:
Got a new Viper 5901 for about a month now and I couldn't be happier. Unfortunately, I just accidentally dropped my 2-way remote control on a ground yesterday and the back lid of it popped out but not fully off. So I just pushed it back to close it. Tested OK, everything seems to work great except that the siren response sounds really soft (I can't bearly hear it) at all to when I arm, disarm and worst of all, no sound when alarm goes off. It appears that the brain went into the Silent Mode 2 after it got dropped. I did try to restore the "Confirmation Chirps" feature to default, i.e. On w/Warn Chirps On, but it still didn't work. Tried my 1-way control too, same results.
I'm not sure where to go next to get out of this mode. Any help would be greatly appreciated.
Having a similar problem. How did you solve it?
Posted By: Mark Mizenko
Date Posted: July 27, 2010 at 1:03 PM
If the internal speaker on the remote control is not working, return it to the dealer and DEI will warranty it.
Posted By: t&t tech
Date Posted: July 28, 2010 at 6:39 AM
Are you referring to the siren in the car or the sound the remote makes which mimics the siren?
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: d4rkzone
Date Posted: July 28, 2010 at 4:00 PM
t&t tech wrote:
Are you referring to the siren in the car or the sound the remote makes which mimics the siren?
The problem was with the siren in the car. However I found the solution. I needed to re-configure it again using the "Feature Instructions".
Posted By: t&t tech
Date Posted: July 28, 2010 at 8:14 PM
Ok! ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: fredddy9
Date Posted: July 31, 2010 at 1:21 AM
regarding this topic, are there any silicone protective sleeves available for LC3 remote (?)
actually i keep mine attached to my trousers not the car keys, but still it would be nice to have some protection even against the scratches or dust what can collect between the buttons.
Posted By: tedmond
Date Posted: July 31, 2010 at 2:17 PM
i have seen people with a leather/plastic case, but its bulky.
If you dont mind then im sure you can find it on ebay for less than 15 bucks.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: fredddy9
Date Posted: August 14, 2010 at 2:31 PM
|
