smart start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119253
Printed Date: June 06, 2024 at 2:13 PM

Topic: smart start

Posted By: tastysuds
Subject: smart start
Date Posted: January 11, 2010 at 11:20 AM

Sorry for the repost but I titled it under the model # last time. I am a retired installer and want to hook up a smartstart on a virper 5501 I just installed ( not enough range). Do I need a bitwriter, contract or program to finish the install with iphone?. thanks, Bob ( I didnt purchase the smartstart yet )

-------------
bob

Replies:

Posted By: yimke
Date Posted: January 12, 2010 at 10:17 PM

You need the smartstart module, if the 5501 is compatible. It hooks up via the bitwriter port. And you need a computer with an active internet connection. Also an Iphone with the application downloaded.

Posted By: tastysuds
Date Posted: January 13, 2010 at 10:56 AM

Thanks for the info Yimke. Does the computer need to be a laptop or can I do it from a desk pc with internet connection. I know this is a new product and can find it for around $250. I didnt want to have it installed but wanted to install it myself. I just wanted to make sure activating it would not have been a problem... thanks

-------------
bob

Print Page | Close Window