idatalink gound out when running wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119467
Printed Date: June 07, 2024 at 3:03 PM

Topic: idatalink gound out when running wire

Posted By: customvega1
Subject: idatalink gound out when running wire
Date Posted: January 19, 2010 at 12:57 PM

hello i have a viper 5101 unit that im using with the idatalink ads-tbsl pl, i got everything figured out other then two things. this is being used on a saturn vue 2006.

where do i hook up the pink ignition input wire to (i think that would be on the vehicles pink ignition switch harness) correct me if im wrong

then other one is the ground out when running for the idatalink, not sure where this would go on the remote starter unit.

any info would be great thanks

-------------
vega

Replies:

Posted By: Twelvoltz
Date Posted: January 19, 2010 at 1:23 PM

customvega1 wrote:

where do i hook up the pink ignition input wire to (i think that would be on the vehicles pink ignition switch harness) correct me if im wrong

The heavy pink wire H3/1? This hooks to the vehicle's primary ignition wire. Yes, in your 06 vue that wire is pink.

You do not need to do anything with the small gauge pink wire negative ignition output.

customvega1 wrote:

then other one is the ground out when running for the idatalink, not sure where this would go on the remote starter unit.

This can go to the blue or the blue/white (status output) of the Viper unit.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: customvega1
Date Posted: January 19, 2010 at 3:14 PM

thank for your help that is great and quick. thanks again

-------------
vega

Print Page | Close Window