Print Page | Close Window

ignition zone trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119604
Printed Date: June 12, 2024 at 8:53 PM


Topic: ignition zone trigger

Posted By: BLT79
Subject: ignition zone trigger
Date Posted: January 24, 2010 at 8:34 PM

I just finished installing a viper 5701 alarm/remote start in my 09 charger. Everything works fine, the alarm, the remote start, the bypass, etc. But when I make any kind of command (arm, disarm, remote start) I get the error sound from the keyfob and 5 clicks/flashes. The manual says it's a ignition trigger. What exactly does that mean? I have an xpresskit CHALL bypass module, running d2d connection, the only wires I have connected from the bypass to the brain is the ignition, and door status. Any help would be greatly appreciated.



Replies:

Posted By: calijtee1
Date Posted: February 09, 2010 at 1:38 AM
did you ground the black with white wire the neutral wie ??

-------------
installers do it best. we got the magic hands!


Print Page | Close Window