door poppers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11985
Printed Date: May 17, 2024 at 4:55 AM

Topic: door poppers

Posted By: congoman
Subject: door poppers
Date Posted: April 09, 2003 at 1:31 AM

Just wondering if you can use door lock actuators to pop open doors with no handles on the outside?

If so, how do I wire the relay? Of course I also need a spring loaded pin correct?

any help would be great , thanks!!!!!!!

Replies:

Posted By: GMC4x4Guy
Date Posted: April 09, 2003 at 3:13 AM

Use trunk-pop solenoids, actuators are not usually strong enough. You'll need two relays, one for each door. If you plan on using an alarm system you will need two extra channels, one for each door.

#85 goes to a negative trigger from your alarm (or external switch)
#86 goes to 12 volts constant
#30 goes to 12 volts constant (just jump to #86)
#87 goes to your new trunk-pop solenoid

The other wire of the solenoid (if there is one) will go to ground

-------------
"Drive it like you stole it"

Print Page | Close Window