comp ft6000as

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119923
Printed Date: May 29, 2024 at 1:29 AM

Topic: comp ft6000as

Posted By: timelessr1
Subject: comp ft6000as
Date Posted: February 05, 2010 at 8:06 PM

I got my alarm installed professionally since i dont have the time anymore to do it myself (also since its freezing here, and i dont have a heated garage) I got a Compustar FT6000AS installed in my 2010 ford f150. It seems that everything is working perfectly, except one thing. The Passive arming. When i try to activate passive arming (buttons 2+3 fo .5 secs) the remote reads "FAIL" where the time is normally stated. I called the installer, and at first he didnt know why this was doing it, and said, he has to connect to the brain and diagnose. Now this will be the third time i have to bring my car back. He also said that he talked to firsttech and they said that this was a setting that he had to set. Is this true? I would like to know the real answer before I have to drive another 50mins each way to "try" something that might not even be the case.

Replies:

Posted By: timelessr1
Date Posted: February 05, 2010 at 8:24 PM

Oh, also a Blade-AL interface is being used for the install

Posted By: enice
Date Posted: February 05, 2010 at 9:16 PM

It is option 1-08 setting 2.

Posted By: timelessr1
Date Posted: February 06, 2010 at 9:02 AM

enice] wrote:

t is option 1-08 setting 2.

Option 1-08 setting two i thought just allows the alarm to passively arm AND NOT passively lock. I want the system to do both. lock and arm, and thatwhen the remote is saying FAIL. I didnt think it was a feature the installer has to turn on.

Posted By: enice
Date Posted: February 07, 2010 at 12:30 AM

We are compustar dealers and there are 3 settings...off, passive arming with locking, and passive arming without locking. That needs to be on, thats why it gives you the fail message.

Posted By: dswift
Date Posted: February 08, 2010 at 6:53 PM

roger that 1-08-2 will allow the remote to use that feature. Word is like bondo.

-------------
"dont ground out!"