90 ranger, astrostart rs 611, rs mi?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120191
Printed Date: May 31, 2024 at 9:43 PM
Topic: 90 ranger, astrostart rs 611, rs mi?
Posted By: JTB530
Subject: 90 ranger, astrostart rs 611, rs mi?
Date Posted: February 17, 2010 at 11:52 AM
I have a AstroStart RS-611 that I'm installing into a 1990 Ranger with a 5 speed using a RS-MI. The truck has no options so it's a pretty straight forward other than the manual interface. I have the main unit installed and working as long as I depress the clutch. How do I bypass the clutch switch? The RS-MI module connects to interior light positive and negative and the e-brake to monitor for the safety sequence. I'm also having a hard time with the programming directions. I need to get to level 2 section 13 to program the onboard relay. But the directions look similar to egyptian hieroglyphics. Any help is greatly appreciated.
Thanks in advance,
Jason
Replies:
Posted By: sneakycyber
Date Posted: February 17, 2010 at 12:55 PM
Generally you have to get the starter wire after the clutch or wire a relay to simulate clutch pushing during remote start cranking. I'm not a licensed DEI retailer so I don't have access to the install manual so I can't help with the programming.
-------------
Posted By: monty_77
Date Posted: February 18, 2010 at 8:36 AM
some one wrote up instructions for the rs-613 same programing
try the download under that one
|