2008 fj cruiser, key bypass?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120543
Printed Date: June 01, 2024 at 6:57 PM

Topic: 2008 fj cruiser, key bypass?

Posted By: rcavictor
Subject: 2008 fj cruiser, key bypass?
Date Posted: March 06, 2010 at 12:35 AM

Hello friends ,

Will Directed XK05 work for key bypass in 2008 Toyota FJ Cruiser ?

Thanks ......... rcavictor .

-------------
Thanks for answering, rcavictor.

Replies:

Posted By: kreg357
Date Posted: March 06, 2010 at 5:21 AM

Yes, it will work and I would suggest using the 5.PKTI V1.02 firmware. No wires to cut and all done at the steering column.

-------------
Soldering is fun!

Posted By: Chris Luongo
Date Posted: March 07, 2010 at 11:33 PM

kreg357 wrote:

Yes, it will work and I would suggest using the 5.PKTI V1.02 firmware. No wires to cut and all done at the steering column.

Are you sure?

They don't show anything about that firmware here:
https://xpressdownload.com/manual.aspx?p=346

I've always found the XK05 in a Toyota to be the most ridiculous thing, especially when Fortin and ADS have solutions that don't involve running wires all over the car and under the glove box and under the hood.

Posted By: kreg357
Date Posted: March 08, 2010 at 4:55 AM

Chris, I agree with you on the XK05 with the PKT2 firmware. Installation with that was horrible! The new 5.PTKI V1.02 install wiring is similar to the iDatalink. No wires to cut, no security light to override and all done in the steering column. It's a vast improvement. I did a couple of Toyotas last week using the XK05 and .5PTKI combo and it went very smoothly.

Here is a link to the DEI info: https://www.xpresskit.com/product.aspx?productid=346#m_5.PKTI

-------------
Soldering is fun!

Print Page | Close Window