Print Page | Close Window

need an expander for a 5902

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121053
Printed Date: May 29, 2024 at 3:25 PM


Topic: need an expander for a 5902

Posted By: copper&black
Subject: need an expander for a 5902
Date Posted: March 29, 2010 at 11:51 AM

Hello all!

This is my first post and my first time ever trying to wrap my head around possibly installing my new 5902. I purchased pretty much everything I think I need, but if any of you guys notice something I've missed please let me know.  First of all allow me to explain my situation on why I need an expander. I recently customized my 2002 Yukon, by shaving the door handles, rear hatch handle, and rear key hole push button for rear glass. All 6 are now on soleniods using an autoloc receiver to control them. At the moment my Yukon is completely gutted, b/c I just finished covering the entire interior with Dynamat Extreme. I purchased the 5902 and all the goodies over the past couple weeks, but I hit a speed bump. At the moment I need 6 Aux outputs to control all I want to, but the 5902 only has 4. Like i said I'm not very knowledgeable about the subject, I just wanted a confermation that DEI 450R is compatable with the 5902.

Here is what I have, and please let me know if there are any issues with this set up...

Viper 5902

VSM100 (Viper Smart Start)

530T (Windows Automation) I believe this takes an aux channel as well...

508D (Field Disturbance Senson)

507M (Tilt Sensor)

520T & 515R (Back up battery & Siren)

506T (Glass Break Sensor)

620v (Viper Leminescent Badge)

 XK09 (Interface Module)




Replies:

Posted By: tedmond
Date Posted: March 29, 2010 at 3:09 PM

tooo many sensors. keep 520t,515r,

and for accessories, the luminescent badge is cool but not necessary. 530t and vsm100

the channel expander should work, but i think you need a bitwriter to set them.



-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: copper&black
Date Posted: March 29, 2010 at 3:52 PM

Too Many? How so? Is the system no capable of handling all those sensors? I live in South Florida (Miami/ Ft Lauderdale) and trust me, I need the maximum level of protection.. The truck has already been stolen once, and I was very lucky to get it back. It also has an 8 Infinity Kappa perfect speaker system , surround sound, all alpine electronics, and once I’m done building the motor, it will have a 600hp supercharged 6.0L . So needless to say there will be a lot of money and time investment there I want to protect. ….






Print Page | Close Window