Transponder Keys

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12121
Printed Date: May 16, 2024 at 6:49 PM

Topic: Transponder Keys

Posted By: Stunnin
Subject: Transponder Keys
Date Posted: April 12, 2003 at 5:57 PM

Does anyone know how to program a transponder key to a Mitsubishi? If it matters it’s a 2001 Diamante. We have two keys and only one works, the other only starts the car for a second and then shut off. The dealer wants $250.00 to program the keys. This forum has been a great help in the past and I know it will always be. Thanks!:D

Replies:

Posted By: Velocity Motors
Date Posted: April 12, 2003 at 7:13 PM

Look in your driver's manual for the car. It is outlined in there for you.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: scuba1954
Date Posted: April 12, 2003 at 7:48 PM

If it is anything like my ford, you can only program a new key if you have two working keys, otherwise off to the dealer you go. Good luck!

Posted By: Stunnin
Date Posted: April 12, 2003 at 8:04 PM

Thanks Jeff but it said noting about programing them only to take it to the local dealer is there anything else I can do to program it? Thanks.

Posted By: Velocity Motors
Date Posted: April 12, 2003 at 8:49 PM

Insert first programmed key leave on for 5 seconds, turn off and

remove key.

Insert second programmed key turn on and remove within 7 seconds

Theft-alarm indicator will blink twice.

Insert new key and turn on within 7 seconds the theft-alarm

indicator will come on for about 3 seconds when the registration

of new key is complete. Repeat this step within 30 seconds for

additional keys.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Stunnin
Date Posted: April 13, 2003 at 12:57 AM

Do I need to have two programed keys for this to work? I currenty only have one active key. Eighter way I will try. Thanks!

Posted By: Velocity Motors
Date Posted: April 13, 2003 at 7:34 AM

Yes, you require 2 programmed keys for this to work. Otherwise you need to go to the dealer to get the TCL-1 or MUT2 device for programming .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA