Print Page | Close Window

sun roof

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12240
Printed Date: June 11, 2024 at 7:53 AM


Topic: sun roof

Posted By: edwinve
Subject: sun roof
Date Posted: April 15, 2003 at 11:00 AM

HI, I'M TRYING TO INSTALL A WINDOWS MODULE TO OPEN A SUN ROOF, IT DOESN'T WORK FOR ME.

PLEASE ANY IDEAS WHY IS NOT WORKING, THE WINDOWS ROLL UP GOOD WHEN I PRESS THE ALARM BUT THE SUN ROOF DOESN'T DO IT.

PLEASE HELP ME

THANKS EDWIN




Replies:

Posted By: CruisinS&S
Date Posted: April 15, 2003 at 10:56 PM
what type of alarm, sunroof module and alarm brain?

-------------
Cruisin Security And Sounds




Posted By: edwinve
Date Posted: April 21, 2003 at 11:13 AM

CruisinS&S wrote:

what type of alarm, sunroof module and alarm brain?

the alarm is 3 channels, the car is toyota cressida 84 , regular window module , i'm using one window module for the two door windows in the front and another module for the door windows in the back and another module for the sunroof , when i have the 4 windows down and sunroof is open , i armed the car the 4 windows will close but the sunroof do not close, i put diodes in each module (1 amp diode), if you know anything please help me

thanks edwin





Posted By: jgold47
Date Posted: April 21, 2003 at 2:03 PM

what brand module/alarm, also is the sunroof factory, aftermarket etc....

what I am geting at is the module wired correctly...also another thing to thik about, is your ground when armed output, what is it rated, it may not be enough to throw mutiple relays like that, you may need another relay (a relay for the relays) if its a dei, then they are like 500 Ma outputs usually *guess* which means you would be cutting it awfully close for 3 relays plus whatever else that thing triggers like starter kill etc.... try adding on another relay....






Print Page | Close Window