autopage c3-rs915, 99 toyota avalon
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122630
Printed Date: May 21, 2024 at 11:59 PM
Topic: autopage c3-rs915, 99 toyota avalon
Posted By: pmesfun
Subject: autopage c3-rs915, 99 toyota avalon
Date Posted: April 24, 2010 at 1:17 PM
I have an Autopage C3RS915 that I am installing in an 1999 Toyota Avalon XLS, but when I try to remote start the car, I get a messing on the LCD screen that says Engine Stop? What could be the problem?
-------------
Autopage C3RS915
Replies:
Posted By: pmesfun
Date Posted: July 11, 2010 at 5:14 PM
I am installing an Autopage C3-RS915, and need help for the Dome Light Control Output. In the installation manual it says to connect this wire to the door switch wire and use a relay. On 87 it needs to be fused to the courtesy light and 30 is on the other side of the wire.Is it possible to just connect this wire to the Door Trigger switch? It is also a negative wire. Any help is appreciated. Thanks!!!!
-------------
Autopage C3RS915
Posted By: pmesfun
Date Posted: October 23, 2010 at 7:13 PM
Anybody have a clue, dont want to waste 200 to get it installed, Thanks.
-------------
Autopage C3RS915
Posted By: cjanke
Date Posted: October 26, 2010 at 6:45 PM
why would it be a waste to have it installed. Do you want it done right? An alarm or remote start system is only as good as the install. If not installed properly it will not operate the way you would expect or even worse damage your vehicle. to answer your questions you MUST use a relay to hook up Dome Supervision. Did you hook up tach? Is it programmed? Hood pun faulty? Brake wire hooked to 12v instead of the brake wire? Did you bypass the immobiliser?
|