viper 5901 rs, corolla 2010
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122837
Printed Date: June 09, 2024 at 6:26 AM
Topic: viper 5901 rs, corolla 2010
Posted By: d4rkzone
Subject: viper 5901 rs, corolla 2010
Date Posted: July 25, 2010 at 10:37 PM
Hi,
I recently installed the viper 5901 on my Corolla 2010. I was wondering where I need to go to program the alarm for triggering, when I smack the car a little bit? When I do that it just turn on the light (flash them) and then my 2 way remote emit the alert. But I also want the alarm be trigger.
In addition I saw other alarm (not the viper, a very cheap one) that just when you try to open the door it sounds (with the door locked), any idea of how to do this?
Replies:
Posted By: KPierson
Date Posted: July 26, 2010 at 4:59 AM
It sounds like you need to adjust the sensitivity of the shock sensor. Setting them is an art - too sensitive and they false alarm all the time, not sensitive enough and they never go off.
Some cars will turn on the dome light if you simply lift up on the door handle (even if locked). This can be used to set the alarm off on certain cars. This is a car specific feature, not an alarm specific feature.
-------------
Kevin Pierson
Posted By: d4rkzone
Date Posted: July 26, 2010 at 10:56 AM
Thanks for reply.
If I one to set the chirp on when I lock the car, where is that option is located?
I only found in the manual how to put in silence when locking/unlocking.
Posted By: KPierson
Date Posted: July 26, 2010 at 1:45 PM
Not sure what you are asking.
-------------
Kevin Pierson
Posted By: howie ll
Date Posted: July 26, 2010 at 5:43 PM
The chirp is on by default.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d4rkzone
Date Posted: July 26, 2010 at 11:32 PM
But then why when I lock/unlock it doest not chirp? It only chirp on the remote.
Posted By: howie ll
Date Posted: July 27, 2010 at 3:24 AM
Have you installed a SIREN? Does it sound when you trigger the alarm?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d4rkzone
Date Posted: July 27, 2010 at 10:00 AM
I just want to confirm that this one XK05 Programmable Platform will be compatible with the Viper 5901.
I installed the alarm with the RS but the car will not start if the key is not in the starter. So I want a method that I do not need the key in the starter to remote start it.
Posted By: kgerry
Date Posted: July 27, 2010 at 10:23 AM
all XK product are compatible with Viper (all DEI) product....
having said that, i would still probably use an I-data piece myself...... ------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: d4rkzone
Date Posted: July 27, 2010 at 11:29 AM
Page 17 in the owner's guide :
Arm, Details: The siren in the vehicle will "chirp" once and the parking lights will flash once.
But mine only flash once... any ideas?
Its like mine is permanently in silent mode...
Posted By: howie ll
Date Posted: July 27, 2010 at 11:51 AM
Does the Siren sound if you trigger the alarm?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d4rkzone
Date Posted: July 27, 2010 at 12:14 PM
howie ll wrote:
Does the Siren sound if you trigger the alarm?
I triggered the alarm by locking it and with my key unlock the door and then open it. The alarm start like beep beep beep and the the horn...
But I noticed a weird thing. My stock alarm is still working how I disable it?!
In my corolla if I lock the door with my key the stock alarm will activate...
Posted By: d4rkzone
Date Posted: July 27, 2010 at 1:28 PM
I solved the problem with the chirp at the time of arm/disarm.
Was necessary to reprogram it with the Feature programming instructions.
I have another question, when I try to open the trunk using the f and then pressing Aux its said "Pulsed"... that is the correct sequence?
Because my trunk is not opening. I think maybe the guy did not installed it.
Posted By: kgerry
Date Posted: July 27, 2010 at 5:16 PM
don't press f just press and hold the AUX button for 3-4 seconds.... it is a delayed validity circuit.... this will of course only pop the trunk if you paid to have trunk release connected....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|