power door lock switch
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122857
Printed Date: May 01, 2024 at 1:52 PM
Topic: power door lock switch
Posted By: todd17
Subject: power door lock switch
Date Posted: July 27, 2010 at 10:24 AM
Looking to put central power door lock switch in 1993 Range Rover. OEM alarm utilizes two separate (-) inputs for door lock and unlock. I want to use a momentary push switch to send both lock (first push) and unlock (second push) negative inputs to OEM alarm. Ideas and diagrams appreciated.
Replies:
Posted By: howie ll
Date Posted: July 27, 2010 at 11:53 AM
Oh boy just about the worst vehicle to play with the lock system, it's all CAN data.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: July 27, 2010 at 11:55 AM
Sorry, didn't read the year properly, STILL wouldn't touch it.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tedmond
Date Posted: July 27, 2010 at 7:04 PM
what are you tryin to achieve ?
------------- Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: July 27, 2010 at 7:27 PM
Ted for late 90s and by the way, from the year it could be either a Vogue or "classic" we just gave up on the ECU under the seats and added a slave motor on the drivers door. They are a real PITA. I run a mile from them, late 90s went from British Leyland wiring to BMW then Ford.
Even now the Freelander and Disco use a Volvo ignition system so where does our friend start?
By the way you will need a custom processor to achieve sequential locking from one switch, a momentary 1 pole 2 way centre off will accomplish this.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|