remote start troubleshooting
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123177
Printed Date: October 31, 2024 at 7:30 PM
Topic: remote start troubleshooting
Posted By: southpaw0314
Subject: remote start troubleshooting
Date Posted: August 19, 2010 at 10:06 PM
i have a manual 99 camaro with a viper 5701 installed everything works on the alarm side but i can't figure out what im doing wrong for the remote start. after i try to set it so that i can remote start it it flashes or beeps 7 times. what should i check?
any help is appreciated
Replies:
Posted By: smokeman1
Date Posted: August 20, 2010 at 6:02 AM
LED Flashes Shutdown Mode
1 Runtime expired
2 Over-rev shutdown
3 Low or no RPM
4 Transmitter shutdown (or optional push button)
5 (+) Brake shutdown
6 (-) Hood shutdown
7 Timer mode/Turbo mode/Manual mode error *
8 Neutral safety shutdown
9 Low battery (voltage mode)
10 Alarm triggered **
11 Wait-to-start input timed out
*Timer mode error: Ignition is on or shutdown input is active when activating
timer mode.
Turbo mode error: Turbo mode is programmed off, engine is not on or shutdown
input is active.
Manual mode error: MTS mode not enabled.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: x1le
Date Posted: August 20, 2010 at 11:21 AM
for manual transmissions you need the clutch bypassed, along with having the footbrake, e-brake, and tach connected.
If all that is true, you need to put it in the MTS mode by doing this -
while the vehicle is running, hold the foot brake, engage the e-brake, and then release the footbreak. Then hit the remote start button on the remote. You should get a parking light confirmation and the vehicle will stay running after you remove the keys. step out, close the door, and the car will shut down after you hit the lock button. It can now be remote started.
|