seat heater
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123217
Printed Date: June 16, 2024 at 4:59 AM
Topic: seat heater
Posted By: russbm
Subject: seat heater
Date Posted: August 23, 2010 at 3:12 PM
I am installing seat heater in a 2010 Chevy Traverse I need to know the method of Hooking a relay to the 12v ign it has a thin wire there.
Replies:
Posted By: russbm
Date Posted: August 24, 2010 at 5:46 AM
What I want to know is what way should the relay be wire to the 2010 Chevy Traverse it has a pink 12v ign wire at the wiring harness and it is a thin wire, so the seat heater need to be off when the ign Key is turn off and it cannot be on constant because customer sometime leave them on. Thank in advance.
Posted By: Mike M2
Date Posted: August 24, 2010 at 6:38 AM
You need to wire a relay and have the pink ignition wire trigger the relay only. Get power for the relay at any RED / white or RED / black that is heavy guage from under the dash. The pink ignition wire is only 2 amps...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: russbm
Date Posted: August 24, 2010 at 8:18 AM
Ok will the RED / white from the power outlet do ok. What is the relay layout that i should wire up. Thank you
Posted By: russbm
Date Posted: August 24, 2010 at 8:45 PM
Never mind i got it figure out.Thanks for the help.
|