Print Page | Close Window

cm3200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123717
Printed Date: October 31, 2024 at 6:20 PM


Topic: cm3200

Posted By: daytonboi
Subject: cm3200
Date Posted: September 29, 2010 at 8:09 PM

I just purchased a Compustar CM3200. I would like for the horn to honk when locking or even unlocking the doors. I currently have a CM1000 installed and I'm just going to change to the 3200. However, I see that this model has two extra wires for a (-) pulse for arming and disarming. I'm wondering can I use those two for my horn honking?



Replies:

Posted By: tedmond
Date Posted: September 30, 2010 at 12:12 AM
there is a dedicated output for horn (-)

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: daytonboi
Date Posted: September 30, 2010 at 6:30 AM
My 3200 doesn't have a horn output.

-------------
2013 Chevy Impala LTZ




Posted By: simplyfalling
Date Posted: September 30, 2010 at 1:29 PM
Its the white wire on the 8 pin connector. 





Print Page | Close Window