compustar 4200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124077
Printed Date: May 08, 2024 at 7:55 PM

Topic: compustar 4200

Posted By: netflow
Subject: compustar 4200
Date Posted: October 22, 2010 at 10:36 PM

Compustar 4200,Chrysler Sebring
Doors opens and close. Engine dont starting. No lights flashings and dont hear any sounds from relay. Fuse on red wire to ignition was broken I changed it.
What to check?

Replies:

Posted By: simplyfalling
Date Posted: October 22, 2010 at 11:17 PM

Try taking it out of valet mode. Push buttons 1 and 3 at the same time. Should be lock and trunk release. Just something to try.

Posted By: phil6710
Date Posted: October 22, 2010 at 11:27 PM

turn the ingition key on,off 5 time and the 5th time leavein the on position. You should hear the realay for the parking lights click and the lights should flash. Then press the lock button on the remote. This will take it out of valet mode

Posted By: netflow
Date Posted: October 24, 2010 at 8:20 PM

I tried oth methods and nothing happend((

Posted By: netflow
Date Posted: October 25, 2010 at 9:07 PM

No more ideas how to resolve problem???

Posted By: tedmond
Date Posted: October 26, 2010 at 3:17 PM

cycling ignition 5 times puts it into valet mode.

to get our of valet mode.

turn ignition on, press buttons 1 and 3.

if that doesnt work, reset the enture system by takin out all fuses for 1 minute, replace and reprogram all remotes.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window