bypass for 2009 nissan rogue w/ intellike

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124161
Printed Date: May 14, 2024 at 1:44 AM

Topic: bypass for 2009 nissan rogue w/ intellike

Posted By: khbronn
Subject: bypass for 2009 nissan rogue w/ intellike
Date Posted: October 28, 2010 at 11:38 AM

Just wondering what interface you would recommend for this vehicle if anyone has had good or bad luck with any.Im considering Fortin Can SL2,xpresskit DLPK can bus multi,or one from ADS idatalink.I have had bad luck with omega in the past on jeep and chrysler products has anyone else?Thanks in advance

Ken

-------------
kbronnson

Replies:

Posted By: Satkunas
Date Posted: October 28, 2010 at 2:08 PM

Ken, Fortin has several modules that will cover this vehicle.

https://ifar.ca/en/vehicles/nissan/rogue/2009-intelligent_key/

Posted By: kreg357
Date Posted: October 28, 2010 at 6:27 PM

Just did a 2011 Nissan Rogue with Intelli-Key ( same as prior years ). Used an iDatalink ADS AL CA flashed with ADS AL(DL) NI firmware. Easy install, easy program to car, "key" take-over works well. iDatalink instruction guide very accurate and easy to follow.

-------------
Soldering is fun!

Posted By: Mark Mizenko
Date Posted: October 28, 2010 at 10:00 PM

Ditto on the IDatalink Al-CA

Print Page | Close Window