Print Page | Close Window

no more code alarm flcan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124215
Printed Date: May 20, 2024 at 11:38 AM


Topic: no more code alarm flcan

Posted By: ace5000
Subject: no more code alarm flcan
Date Posted: October 31, 2010 at 6:07 PM

Hello folks,

I have installed (2) Code Alarm systems for myself over the years and need a change. I now have an FLCAN from Flashlogic installed, and it works great and would like to keep it.

What other remote start/security manufacturers/models can I use with the digital DBI port cable from the FLCAN?

Many thanks.



Replies:

Posted By: 91stt
Date Posted: November 11, 2010 at 9:08 PM
Flashlogic is iDatalink, so any compatible with iDatalink should work. I have not used those units so I'm not sure if the D2D plugs are compatible with other systems.

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.




Posted By: i am an idiot
Date Posted: November 11, 2010 at 10:17 PM
Audiovox Prestige systems work well with the Flash Logic pieces.




Posted By: godd dan it
Date Posted: November 11, 2010 at 11:59 PM

i am an idiot wrote:

Audiovox Prestige systems work well with the Flash Logic pieces.

x2. Code Alarm is an Audiovox product, so Audiovox systems work too. https://mobile.audiovox.com/ I wish Audiovox showed all the models they have. I have a Prestige 1 mile alarm/remote starter, but cant find it on their site. Even if you cant plug the cable into the alarm, you could always just W2W. But it does make it alot easier if you can do with out it.

Maybe it works for Compustar too? I dont know....I never installed any Compustar systems.



-------------




Posted By: ace5000
Date Posted: January 10, 2011 at 6:29 PM
UPDATE: I want to keep the FLCAN Flash Logic CAN DBI unit because it integrates so well.

Will it work with a Compustar remote/security?

Thanks!




Posted By: tedmond
Date Posted: January 11, 2011 at 12:08 AM

yes it will.



-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert





Print Page | Close Window