2008 dodge caliber remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124518
Printed Date: June 08, 2024 at 5:44 PM
Topic: 2008 dodge caliber remote start
Posted By: tianot
Subject: 2008 dodge caliber remote start
Date Posted: November 17, 2010 at 10:41 PM
hey guys! how to wire the r/s unit for the 2008 caliber if i use a evo-chr (thar-chr2) bypass module? what are the only r/s wires i need to connect into the vehicle? i will use a compustar r/s unit. thanks
-------------
tianot
Replies:
Posted By: autoobsessionny
Date Posted: November 18, 2010 at 8:05 PM
Check out the fortin Evo bypasses. I think they make chrysler specific harnesses to make those super easy.
-------------
Auto Obsession
Posted By: autoobsessionny
Date Posted: November 18, 2010 at 8:06 PM
Im a dumb ass i didnt even see the word evo in your post!! Lemme know how that works out.
-------------
Auto Obsession
Posted By: tianot
Date Posted: November 18, 2010 at 8:22 PM
thanks bro, hope you can help me.
-------------
tianot
Posted By: mpe235
Date Posted: November 19, 2010 at 5:47 PM
https://www.youtube.com/watch?v=BTwSWYHjhyo
Check out this youtube video by fortin. They show a quick install for the Caliber. ------------- Nissan Master Tech.
Posted By: tianot
Date Posted: November 19, 2010 at 6:04 PM
hey, ive seen the video already and im not so sure what are the wires he use.
i think the only wire needed are 12volt, ground, horn, hood pin and the parking lights, but im not sure
-------------
tianot
Posted By: mpe235
Date Posted: November 19, 2010 at 6:08 PM
According to the install sheet it looks like the only wires for the remote start are power, ground and parking lights. The evo-chr should handle the rest. ------------- Nissan Master Tech.
Posted By: Velocity Motors
Date Posted: November 21, 2010 at 4:04 PM
The EVO-CHR will take care of the MUX start, ACC and convenience features for the vehicle. You will need to wire directly to the battery for the power as there is only low voltage power inside the vehicle. The parking light is a (+) WHITE/ VIOLET wire inside the driver's kick panel where all the wires gather at the front corner of the dead pedal.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|