viper 550 esp to viper 5902

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124608
Printed Date: June 08, 2024 at 4:32 AM

Topic: viper 550 esp to viper 5902

Posted By: stone007
Subject: viper 550 esp to viper 5902
Date Posted: November 22, 2010 at 3:57 PM

Anyone know if I can replace a Viper 550 esp with a Viper 5902 with out changing the wiring too much? Right now its in a 96 ford F-350 with the diesel.

Replies:

Posted By: t&t tech
Date Posted: November 22, 2010 at 8:32 PM

The primary harness is basically the same, the power locks harness the same, so basically it's the heavy gauge wires that are different along with the led and the valet switch on the antenna.

Posted By: stone007
Date Posted: November 24, 2010 at 7:01 PM

Sounds good. Thanks for the reply.

Print Page | Close Window