python 991, honda odyssey
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124745
Printed Date: June 01, 2024 at 6:04 PM
Topic: python 991, honda odyssey
Posted By: airforce1
Subject: python 991, honda odyssey
Date Posted: November 30, 2010 at 2:14 PM
Bull dog makes installing remote start like childs play, now I have a pythin 991 and seem to be lost. I bought a DBALL which is suppose to interface with the computer, but the remote start is not working nor lock or unlock on the doors. Does the DBALL interface with lock and unlock D2D or does it have to be W2W.
Replies:
Posted By: Thack79
Date Posted: November 30, 2010 at 3:45 PM
You should wire the whole bypass W2W. less issues and easier to troubleshoot
Posted By: airforce1
Date Posted: November 30, 2010 at 6:52 PM
The problem now is I did start W2W, ending up breaking the immobilizer ring and now awainting for that part, that is the main reason I would prefer to D2D.
Posted By: airforce1
Date Posted: November 30, 2010 at 6:57 PM
Are there many complaints on these bypass units?
Posted By: airforce1
Date Posted: November 30, 2010 at 8:26 PM
How do you change from manual transmission mode to auto mode??????
Posted By: zerepdivad
Date Posted: December 02, 2010 at 1:39 AM
airforce1 wrote:
How do you change from manual transmission mode to auto mode??????
reading the manual is a great way to start. not trying to be mean honestly. but it is a GREAT starting place. ------------- A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: airforce1
Date Posted: December 02, 2010 at 6:42 AM
Read the manual, and I will stop asking. I also read the manual on how to work on a fighter jet and got that working, but this is due to the fact that someone was there to help me who learned from someone else not some manual. So Please don"t underestimate people whenever they ask a simple question.
Posted By: zerepdivad
Date Posted: December 02, 2010 at 9:55 PM
well the manual tells you exactly what to do. but if you want me to retype what the manual says i will....
turn key on and off then hold programming button, hear honk, continue holding hear 2 honks, continue holding hear 3 honks let go then press the programming button twice holding it on the second and press lock on your fob, you'll hear 2 honks then it's programmed for automatic mode.
that's how my viper is if i recall correctly might be slightly different but same concept.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: airforce1
Date Posted: December 03, 2010 at 6:44 AM
little different here, open door, turn key off then on, hold valet button until you get to the third menu, three chirps, once you arrive at the third chirp then I have to prees once again to select option then one more time and hold, then press arm on the key fob. For some reason I was not getting into the menu so i thought maybe there was some thing wrong I was doing, apparently a wire was not connected after observing all my connections, but it is working now and honda has to reprogram my damn key becasue the immobilizer took a dump in the process. I do love this stuff, but working on a jet is a lot easier. Thanks for the reply.
Posted By: airforce1
Date Posted: December 08, 2010 at 2:31 PM
Need help connecting a DB-ALL to a python 991, diagram shows 4 connections, just not to clear on ignition connection
Posted By: airforce1
Date Posted: December 08, 2010 at 2:56 PM
Yes I know the four pin is for transmit and rec but everytime I go to program the DB-ALL it stays solid red waiting for ignition input.
Posted By: zerepdivad
Date Posted: December 08, 2010 at 4:10 PM
did you hook your pink wire to ignition? i'm looking at the manual now and honestly it's pretty cut and dry what it says to hook where..
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: zerepdivad
Date Posted: December 08, 2010 at 4:24 PM
is it flashed accordingly?
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: airforce1
Date Posted: December 08, 2010 at 4:26 PM
yep hooked pink to ingnition from 10 pin harness, still dball does not program.
Posted By: airforce1
Date Posted: December 08, 2010 at 4:28 PM
bought it at a dealer who flashed it for me.
Posted By: airforce1
Date Posted: December 08, 2010 at 4:38 PM
yes it says to connect pink to ignition output, is there a separate ignition output from remote start or do I just tie into ignition 1 input/output, I only ask that because I have it connected from dball to ign1 input/output, to vehicle input as explained but it still does not want to program the dball.
|