2003 350z viper 5901 clutch bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124809
Printed Date: June 11, 2024 at 5:34 AM

Topic: 2003 350z viper 5901 clutch bypass

Posted By: Reefkpr
Subject: 2003 350z viper 5901 clutch bypass
Date Posted: December 04, 2010 at 4:35 PM

I'm replacing my broken compustar with a Viper 5901 on a manual transmission 350z. I need to know how to bypass the clutch switch for remote start. I know the grey and red wire at the clutch switch provides 12 volts when the switch is depressed but I'm not sure where to hook up this wire to the Viper 5901. Any advise would be greatly appreciated. Thanks in advance.

Replies:

Posted By: KarTuneMan
Date Posted: December 04, 2010 at 7:32 PM

You will send a (POS)+ start to the red wire at the clutch switch, ALSO you will still need to power up the second statrer at the ign. switch..

-------------

Posted By: Reefkpr
Date Posted: December 05, 2010 at 3:25 PM

KarTuneMan wrote:

You will send a (POS)+ start to the red wire at the clutch switch, ALSO you will still need to power up the second statrer at the ign. switch..

Cool got the bypass. Now I'm not sure how to hook up second starter at ign switch. I found wiring diagrams that show WHITE/ green at ign switch. My 2003 350z definitely does not have a second starter wire. Could you please tell me how to accomplish this. Everything is working great on the Viper 5901 except the remote start. Thanks again.