python 991, xk01, 05 2500 avalanche acc 2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125152
Printed Date: June 03, 2024 at 6:37 AM

Topic: python 991, xk01, 05 2500 avalanche acc 2

Posted By: scottmt
Subject: python 991, xk01, 05 2500 avalanche acc 2
Date Posted: December 19, 2010 at 10:24 PM

I installed the 991 with the XK01 Interface module on an 05 2500 Avalanche. Everything works great after the install. My question is on the Acc 2 wire. I have the wire but the installation manual didn't cover which wire on the 991 to connect to. This is what I've tracked down as the reason the heated seats won't start when it cold out. Unless there is something in the programming of the XK01 that I overlooked.

Thanks

Scott

Replies:

Posted By: scottmt
Date Posted: December 20, 2010 at 12:25 AM

The unit must not have been cold enough for it to start everything. When done with work tonight it had started drivers seat and rear defrost. Thank you for looking.

Thanks

Scott

Print Page | Close Window