Print Page | Close Window

gmdlbp brown wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125693
Printed Date: April 28, 2024 at 3:18 AM


Topic: gmdlbp brown wire?

Posted By: yoopercheezhead
Subject: gmdlbp brown wire?
Date Posted: January 16, 2011 at 10:13 AM

I purchased a GMDLBP and a Bulldog Deluxe 500 to install in my 2004 GMC Sierra 1/2 ton crew cab. The installation manual for the GMDLBP's brown wire says "NEGATIVE GROUND OUTPUT WHEN RUNNING (-) (REMOTE START INSTALLATIONS ONLY)". What is this wire for? And can someone tell me where to connect it to the bulldog?



Replies:

Posted By: monty_77
Date Posted: January 16, 2011 at 1:46 PM
it gets connected to the Ground While Running (GWR) or Status wire of the remote starter

in you case it's the you can use h7/1 blue/black ignition 3

or you can use Lt.GREEN/ black programed for start status



Posted By: yoopercheezhead
Date Posted: January 16, 2011 at 3:52 PM
roger that. thank you.


Print Page | Close Window