Print Page | Close Window

2006 jeep commander horn honk on start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125885
Printed Date: October 31, 2024 at 6:54 PM


Topic: 2006 jeep commander horn honk on start

Posted By: jmacf14
Subject: 2006 jeep commander horn honk on start
Date Posted: January 27, 2011 at 5:12 PM

I installed an autopage c3RS915 with an idatalink adsalca in this 2006 Jeep Commander, and everything works great, other than I don't want the horn to honk when it locks, or when it remote starts. I know it locks the doors on remotestart, and that is what's causing the honk, is there a way to prevent this? Some way of getting around the factory alarm arm?

Thanks in advance.

-------------
jmacf14



Replies:

Posted By: Twelvoltz
Date Posted: January 27, 2011 at 6:50 PM
From how I understand it, the bypass module sends the same command to the databus as the factory remotes do.

So theoretically I think if you turn off the horn honk with lock it would also stop it from honking after start. However, this will turn it off even if locking with the factory remote. Have a look at the owner's manual for the 06 Commander, you can find it here. Page 189 "Understanding your instrument panel/Customer programmable features"

-------------
Installer, IT support, and FFL. I need less hobbies.




Posted By: jmacf14
Date Posted: January 27, 2011 at 8:16 PM
Thank you twelvevoltz, that worked perfectly.

Thanks again.

-------------
jmacf14





Print Page | Close Window