Print Page | Close Window

avital 4103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126171
Printed Date: May 28, 2024 at 9:15 PM


Topic: avital 4103

Posted By: parreda
Subject: avital 4103
Date Posted: February 15, 2011 at 7:25 PM

Hi im trying to hookup dome light supervision on a 06 ford explorer the problem is the 4103 dosnt have a wire for the dome light supervision so how would i hook it up?



Replies:

Posted By: parreda
Date Posted: February 16, 2011 at 9:27 AM
Anyone???



Posted By: chev104275
Date Posted: February 16, 2011 at 10:13 AM
Check out this post

-------------
If i Can't Install it    I Don't need it   Joe



Posted By: t&t tech
Date Posted: February 16, 2011 at 7:10 PM
That unit does have a dome light wire, it's BLACK/ white on the primary harness.

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5



Posted By: parreda
Date Posted: February 16, 2011 at 7:49 PM
The only BLACK/ white wire it has is for the neutral safety switch input on the remote start harness



Posted By: parreda
Date Posted: February 16, 2011 at 7:55 PM
https://www.directeddealers.com/manuals/IG/Avital/N4103_2008-07_web.pdf     



Posted By: t&t tech
Date Posted: February 17, 2011 at 5:12 PM
Oh, my bad, i got it confused with another unit, follow chev's instructions.

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5



Posted By: parreda
Date Posted: February 17, 2011 at 5:16 PM
Ok thanks



Posted By: parreda
Date Posted: February 18, 2011 at 11:45 AM
How would i wire a dei 528t  from a - trigger from alarm to a + dome light


Print Page | Close Window