my brother removed his viper 791 xv from his wrecked car and handed it to me, unfurtunately a few connectors were left behind. I have contaced directed electronicsand they replied for me to "contact my local dealer" visited two, one was of no help (pretty much brushed me off), the other tried to sell me a new unit.
as far as I can tell, if I set the unit on a table with the main harness looking at me, im missing the 3 prong unit to a black connector, follow to the right and the right lower white plug to a 4 prong connector is missing as well.... at the back of the unit where the serial no is placed, it is mssing a two prong connector. on the left side of the unit im missing a white 2 prong connector and a blue 2 prong connector.... on the xcrs unit Im missing a white 4 prong connector. can anyone point me the right direction in order to be able to obtain said missing parts.... can someone supply the installation/program manual?
thanks, all asistance is greatly appreciated....
if you download the installation manual from this site .. it explains it all for ya as far as what each wire is for.
click the downloads button and type in 791xv and there it is.
most plugs can be bought pretty resonable on ebay. martinhod or honestdee and others.
i think the 4 pin white for the shock sensor can be made from a slightly modified floppy drive plug from an old PC.
-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.
thanks, thruout the evening I managed to do a site search, it came back with some 12 pages of results, as I was getting to the end of the pages I found both pdf files, one for intallation and the other for owners manual.
now I have to locate the parts and I may decide to tackle the installation. Thanks again.