adding a switch to power door lock actuat

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128062
Printed Date: May 05, 2024 at 1:18 AM

Topic: adding a switch to power door lock actuat

Posted By: teddy812
Subject: adding a switch to power door lock actuat
Date Posted: July 27, 2011 at 11:10 AM

I installed after-market door actuators and I want to adding a switch to power door lock actuator.

Is anyone can help me to figuare how to adding a switch?

Thanks!!

-------------
full throttle

Replies:

Posted By: cpgoose
Date Posted: July 27, 2011 at 3:35 PM

You need to get a non-locking rocker switch. It's a switch that rests in the middle. When you push it one way it'll lock the doors, and when you push it the other way it will unlock the doors. It's very easy to wire. What kind of setup to you have for the actuators, or do you have a diagram? If it's something like this, then you just add the switch so it throws a negative pulse either at the lock or unlock.

Print Page | Close Window