viper 5901 and 2005 nissan frontier
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128766
Printed Date: June 09, 2024 at 6:37 AM
Topic: viper 5901 and 2005 nissan frontier
Posted By: timinmd
Subject: viper 5901 and 2005 nissan frontier
Date Posted: October 08, 2011 at 9:17 PM
Ok so I have 99% figured out but one question.. If I'm only hooking up the alarm side now and remote start later when I get the bypass.. What all can I still control on a 2005 Nissan frontier? Parking lights and dome is easy, but Besides the triggers like door, shock, brake, and ignition what else can I do?
Can I do door lock? Factory arm/disarm?
Anyone know if this vehicle needs anything else besides universal bypass?
Thanks
-------------
OIF OEF ODS veteran 101st airborne... State record holder in Tennessee in 2003 single sub 144.1db
Replies:
Posted By: dasbogie
Date Posted: October 09, 2011 at 7:15 AM
you should be able to control everything via analog signal in that truck, like your door locks and factory alarm control, etc. The only thing a bypass is really needed for in that truck is to get around the chipped key. You can install the remote start portion but you would just have to leave your key in the ignition for testing purposes. You will need an extra relay for the 2nd start wire.
-------------
Advanced
Posted By: timinmd
Date Posted: October 11, 2011 at 8:03 AM
How many relays do I need for this alarm... It says in install manual a pair of relays are needed for factory arm and disarm... But the wires in the car are like 22 gauge... I can't see how a relay would be necessary for such a small signal being sent from the alarm..
-------------
OIF OEF ODS veteran 101st airborne... State record holder in Tennessee in 2003 single sub 144.1db
|