Print Page | Close Window

viper 3002 to chall?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129129
Printed Date: June 09, 2024 at 1:51 AM


Topic: viper 3002 to chall?

Posted By: dirtydee
Subject: viper 3002 to chall?
Date Posted: November 07, 2011 at 4:15 PM

Whats up guys, first time posting here and I feel like an idiot.. I have a 2007 dodge charger that I tried to install a viper 3002 in.. well lets just say that went all types of wrong, so I bought the Chall with the t connector for my car.
     
        Now my I cant figure out what wires to connect from the viper to the Chall. Does anyone know if there is a better guide out there?
I have always been good with stereos and building computers, but dam if I can figure this out.

Any help is good thanks guys



Replies:

Posted By: tonanzith
Date Posted: November 19, 2011 at 10:57 AM
It should have come with an installation guide and refer to installation type "E".

-------------
Gary Sather




Print Page | Close Window