python 574

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129432
Printed Date: June 01, 2024 at 12:19 PM

Topic: python 574

Posted By: 507 w
Subject: python 574
Date Posted: November 28, 2011 at 7:06 PM

Hello everyone!!

I hooked up a DBALL bypass with a Python 574 to a 2012 Honda Pilot.

I ran into a problem when I connected pin 12/10 (DBALL Handbrake Status output ) to pin H2/2 (starter Neutral safety input). This prevented me from remote starting the car. I solved the problem by connect pin H2/2 to ground. Does anyone know why? I have the same fault on two vehicles that I've installed.

Second Question: About the Feature Menus

What is Override Pulse count? (Item # 3 of Menu 2) and: Activation Pulse Count? (Item # 5 of Menu 3)

-------------
The Broken Link

Replies:

Posted By: buddholly
Date Posted: November 29, 2011 at 5:13 PM

1. The BLACK/ white needs to see ground at all times on an automatic transmission, only needs ran to the e-brake if the vehicle is a manual.

2. Override Pulse Count is how many times you must press the valet switch to override the Phython alarm.

3. Activation Pulse Count is how many times you must press the remote start button to start the vehicle.

-------------

Posted By: auto electron
Date Posted: September 09, 2013 at 10:41 PM

I installed a python 574 on a 1996 ford crown vic today and I have abs light and a oil light can someone please help me?

-------------
steven church