astrostart 2205/4204 disarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129826
Printed Date: May 20, 2024 at 11:51 PM
Topic: astrostart 2205/4204 disarm
Posted By: brockmag
Subject: astrostart 2205/4204 disarm
Date Posted: December 23, 2011 at 4:32 PM
Installed hundreds of DEI systems before, but never an Astroflex product. Which wire is the factory alarm disarm output on this unit? I have downloaded the installation guide, but it still isn't quite clear. Any input would be appreciated. Also not positive how to change my door lock polarity, I'm used to using the 451m doorlock relay and became spoiled.
Thanks
Replies:
Posted By: monty_77
Date Posted: December 24, 2011 at 12:12 AM
first off, with astroflex, any of the optional output wires can be the disarm or arm wires if you want
the option outputs, on the 16 pin connector option 1 brown, option 2 WHITE/ blue, option 3 white, option 4 purple.
program the disarm output to pulse before, the arm wire to pulse after,
the door lock relays should integrated 6 pin connector(works just like the 451m) blue/white and BROWN / white to polarity 87, blue and brown outputs 30, WHITE/ brown and WHITE/ blue would be 87a.
also the wire diagram is on the back of the brain .
|