Print Page | Close Window

2008 bmw 328i kibmw transponder issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130959
Printed Date: October 31, 2024 at 6:41 PM


Topic: 2008 bmw 328i kibmw transponder issue

Posted By: roxxor
Subject: 2008 bmw 328i kibmw transponder issue
Date Posted: March 19, 2012 at 9:01 PM

Hi all. I am installing a Viper remote start with DLPK and KIBMW on my 2008 328i. All connections are made correctly, and when I hold the valet transponder key I have next to the key cylinder and activate remote start, it works fine. However, I am unable to get the signal to pick up via wire loops as shown in the KIBMW install manual. Any tips on how I might get this to work?

Thanks



Replies:

Posted By: tedmond
Date Posted: March 19, 2012 at 9:39 PM
keep the key wrap tight, and are you using the valet or master key?

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert




Posted By: roxxor
Date Posted: March 24, 2012 at 8:02 AM
Sorry for the delay, been out of town. It is the plastic valet key, which is the one I mentioned that I use for testing the remote start.





Print Page | Close Window