viper 5704 shock sensor?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132130
Printed Date: May 14, 2024 at 7:30 PM

Topic: viper 5704 shock sensor?

Posted By: drmix
Subject: viper 5704 shock sensor?
Date Posted: September 04, 2012 at 12:09 AM

So I installed the viper 5704 on my car last week everything works great on it but the only thing is that whenever a loud truck goes by it chirps my car. Everything that I have read was that the 5704 had an external shock sensor (which came with the alarm but wasnt installed)

The only two sensors I installed was the tilt sensor and a field disturbance sensor. So my question is how are loud trucks chirping the alarm without a shock sensor installed? When it rings on the remote is says shock sensor with a hammer icon.

Replies:

Posted By: howie ll
Date Posted: September 04, 2012 at 2:26 AM

Work out which is plugged into your shock sensor port or disconnect one at a time.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: smokeman1
Date Posted: September 04, 2012 at 7:38 PM

Personally, I had a DEI 508D in my work van. If I was parked on a busy street, it was constantly going off. I pulled it out and put in a 506t audio glass breakage sensor. Just my opinion and 2 cents about the 508D.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation