2006 lincoln town car viper 5301 w/ pkall
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132206
Printed Date: June 11, 2024 at 5:25 AM
Topic: 2006 lincoln town car viper 5301 w/ pkall
Posted By: vbatth
Subject: 2006 lincoln town car viper 5301 w/ pkall
Date Posted: September 17, 2012 at 1:43 PM
I need help installing the Viper 5301 with PK-ALL bypass module on my 2006 Lincoln Town Car. I cant find the D2D port on the Viper 5301 module and the pk-all instructions dont make sense. Also what wires will i not need to use if i use PK-ALL bypass module. PLEASE HELP.
Replies:
Posted By: smokeman1
Date Posted: September 17, 2012 at 7:44 PM
Is your Viper 5301 a non 18 or 24 pin unit? If so the d2d port is on the opposite side of all the connections, should be a RED port.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: vbatth
Date Posted: September 18, 2012 at 12:04 PM
its a non-18 pin. I there a way to find out which pins are which? the PK-ALL came with a connector on one end and loose wires on the other end where it would go into the 5301. I know i'll have to make a custom connector i just need to know which pins correspond with which wire?
Posted By: smokeman1
Date Posted: September 18, 2012 at 12:19 PM
I don't see a 06 town car listed in the PK-ALL instruction/installation guide.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
|