viper 5904 and dei 508d
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132313
Printed Date: April 28, 2024 at 3:59 AM
Topic: viper 5904 and dei 508d
Posted By: bobby speer
Subject: viper 5904 and dei 508d
Date Posted: October 05, 2012 at 3:48 PM
Can a DEI 508d proximity sensor be successfully connected and operated with a Viper 5904, Responder, 2 way alarm?
Replies:
Posted By: howie ll
Date Posted: October 05, 2012 at 4:15 PM
Yes but draw 12V+ red and ground from your 5904 feed wires, I don't know how it would show on your remote.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: bobby speer
Date Posted: October 08, 2012 at 1:55 PM
Thank you greatly, Howie II, for your reply.
Posted By: triplejjj
Date Posted: April 13, 2014 at 2:23 PM
bobby speer wrote:
Can a DEI 508d proximity sensor be successfully connected and operated with a Viper 5904, Responder, 2 way alarm?
How does it display on you remote, mine shows sensor not proximity.
tia
Posted By: howie ll
Date Posted: April 13, 2014 at 5:15 PM
You still plug into the right hand of the two ports but you need a Bitwriter to make it say "Field Effect Sensor".
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: triplejjj
Date Posted: April 13, 2014 at 6:28 PM
howie ll wrote:
You still plug into the right hand of the two ports but you need a Bitwriter to make it say "Field Effect Sensor".
Ok, thanks so much. Just got the Bitwriter, sure comes in handy.
jerry
Posted By: triplejjj
Date Posted: April 14, 2014 at 4:55 PM
howie ll wrote:
You still plug into the right hand of the two ports but you need a Bitwriter to make it say "Field Effect Sensor".
Howie,
Here's the plug location. At least I'm pretty sure it's a 4 wire. Anyhow I changed the icon
to Proximity on zone 4 with the Bitwriter and viola.
I just wondering if this microwave is on all the time, judging by the post I've read, it is.
I just don't want to loose any more brain cells than necessary. I would like your opinion on it though.
btw - thanks for info
jj
Posted By: harryharris
Date Posted: April 14, 2014 at 4:59 PM
Been plugging both into those two mux sockets for over a year now 3 plus a week no problems.
If it worries you, join the black ground lead to your orange armed output, then they will only power up when armed. Note no more than one sensor though (508d).
-------------
Test before boxing up.
Posted By: triplejjj
Date Posted: April 14, 2014 at 6:00 PM
I guess it doesn't bother me, there's more radio waves floating around than I care to think about though. Cell phones, microwaves, bluetooth, am/fm,satellites even my tires are sending
tps signals. So i'm leaving well enough alone here.
thanks
jj
Posted By: howie ll
Date Posted: April 14, 2014 at 10:33 PM
Funny that occurred to me as I was writing up my last post so X 2.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: triplejjj
Date Posted: April 15, 2014 at 4:39 PM
Anybody know why I am getting low battery alerts from my Smart Start APP? I know the battery is not low. I have the app set to alert me for low battery and only seems to happen
if I get a couple of sensor alerts. Can't find anything on it here.
Posted By: triplejjj
Date Posted: April 16, 2014 at 5:53 PM
Let me see if I can answer my own question here.
12.4 at rest
13.4 running
.40 mA parasitic draw
solution
turn off low battery warning in app, guessing it doesn't work so well.
|