556uw rf loop
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132421
Printed Date: June 10, 2024 at 4:53 AM
Topic: 556uw rf loop
Posted By: godsegoizhuge
Subject: 556uw rf loop
Date Posted: October 18, 2012 at 10:01 PM
Hi, this might sound crazy, but is it possible to make your own RF loop for this unit? Reason I ask is because a family member took out her alarm/remote start system from her vehicle before she sold it and forgot to remove the loop from the ignition. I know I could just go to a local shop and buy another unit with all of the wiring, but I thought I'd see if it was possible to do it first. Thanks.
Replies:
Posted By: lurch228
Date Posted: October 19, 2012 at 12:38 AM
Yes you can with some small gauge wire like 24 gauge and some shrink wrap cut just short of a full wrap around ingnition. you will need to make around 6 loops and test if not just keep adding a loop until it picks up the key in the box. Once you got it working a small zip strip around the 2 ends of the wire coming out of the shrink wrap to keep it snug and in place. As for connecting to the box any spare 2 pin connector that will plug in is all you need. Just make sure to solder the wire to the plug.
|