Print Page | Close Window

idatalink flash

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132700
Printed Date: June 01, 2024 at 12:49 AM


Topic: idatalink flash

Posted By: blazing_nitro
Subject: idatalink flash
Date Posted: November 17, 2012 at 11:18 PM

Maybe someone can help I went to future shop to have my idatalink ads-tb flashed to install in my new sienna from my odyssey. Installer was hesitant to help but told me when he hooked up my module he can only flash with Honda or Acura models. Can anyone verify or should I try with another place. Should I just order the directed pkall module? Thanks



Replies:

Posted By: kreg357
Date Posted: November 17, 2012 at 11:27 PM

A true ADS TB bypass module can be flashed with a myriad of different firmwares.  Here is a link to the iDatalink site for more info :

https://www.idatalink.com/product/product/product_id/28

Just look up your Sienna to see if the ADS TB can be used as a transponder bypass for that year and model. 



-------------
Soldering is fun!




Posted By: blazing_nitro
Date Posted: November 17, 2012 at 11:31 PM
Thanks for the quick reply. I forgot to mention that he said this module must be the solo series. Anybody know if that makes a difference.




Posted By: kreg357
Date Posted: November 17, 2012 at 11:43 PM
Yes.  A Solo series module comes pre-flashed with firmware for a specific set of vehicles.  You probably have the ADS TBSL HA bypass module.  It was made for certain Honda and Acura vehicles only.  As such, it can not be re-flashed with the ADS TB TL firmware for your Sienna.

-------------
Soldering is fun!




Posted By: blazing_nitro
Date Posted: November 18, 2012 at 1:15 AM
Thanks it sounds like I'm out of luck. Strange the model on the model ends in just tl oh well.




Posted By: blazing_nitro
Date Posted: November 18, 2012 at 1:17 AM
Typo model says ads-tb




Posted By: kreg357
Date Posted: November 18, 2012 at 4:57 AM
Hardware wise, it probably is an ADS TB module.  They ( iDatalink ) use the modules embedded serial number to classify it as a Solo series and restrict the firmware flashes permitted. 

-------------
Soldering is fun!





Print Page | Close Window