smartstart aux channel enable after activation
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132707
Printed Date: May 05, 2024 at 3:49 AM
Topic: smartstart aux channel enable after activation
Posted By: jcp0575
Subject: smartstart aux channel enable after activation
Date Posted: November 18, 2012 at 4:06 PM
How do I get my smartstart Aux 1&2 Channels enabled after the smartstart was initially activated, but the Aux channels weren't enabled at that time. Problem is I did this with a user/password from online, Smartstart activation went fine, but I didn't activate the Aux. I went back to the website but when I try to access with my AirId, it says that the AirId isn't associated with this account anymore, which is the acct. info I used from searching online. Can anyone help.
Replies:
Posted By: jeffmcdowell
Date Posted: March 02, 2014 at 1:33 PM
I have ran into this as well. Did you ever get it resolved?
-------------
Jeffery
Posted By: jeffmcdowell
Date Posted: March 03, 2014 at 10:11 AM
Just online chatted with tech support and they enabled them instantly.
-------------
Jeffery
Posted By: tommyjerzboy
Date Posted: March 04, 2015 at 7:05 AM
When assigning the aux channels let's say I want channel one for rear defroster and channel two for heated seats, I'm guessing I have to splice into the wires associated with both of those features? And if so which are the aux 1&2 wires on the smart start?
Posted By: howie ll
Date Posted: March 04, 2015 at 9:10 AM
You use the alarm/r.start aux channels hard wired to achieve it, the SmartStart instructs it.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|