2012 cruze oem remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133348
Printed Date: May 20, 2024 at 8:04 PM
Topic: 2012 cruze oem remote start
Posted By: prdjr165
Subject: 2012 cruze oem remote start
Date Posted: January 18, 2013 at 4:25 PM
In the owners manual it says that you can only use the remote start feature 2 or 3 times then you have to start the car with the key before the remote start will work again,My question is if you install an aftermarket remote start in this car will this still happen to the after market one.
I installed a compustar cm4200 with a EVO-CAN and was having problems with the service theft system light coming on.
Replies:
Posted By: lucasoil4u
Date Posted: January 18, 2013 at 5:00 PM
Not familiar with the EVO CAN but usually you have the wrong security light wire interrupted. Check your connections to make sure everything is right and test with a DMM
Posted By: jim hunter
Date Posted: January 18, 2013 at 7:21 PM
no prdjr thats a design the engineers instilled into the factory remote start as they feel a car should not idle for longer than 20 mins without being driven , as to service theft light on is remote start working or not when this message occurs
?
Posted By: prdjr165
Date Posted: January 19, 2013 at 4:09 AM
sometimes the remote start would work fine-then the next try it wouldn't even try to start and the theft system message would come on.I ended up putting in a DB-ALL and programed the compustar to pulse ignition with dis-arm and it seems to be working,I told the customer to call me today with an update.
|