door triggers
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133654
Printed Date: May 28, 2024 at 1:55 PM
Topic: door triggers
Posted By: mbee1
Subject: door triggers
Date Posted: February 21, 2013 at 12:25 PM
asking for help on this project. installing a aps-25c and im having trouble with door triggers on this vehicle. only reading drivers door not the three others. figured out my problem on the door lock actuators, now im stuck on door trigger. open drivers door alarm goes off, but wont on any other door. brown wire from alarm to the grey plug pin#23 tan wire. dash reads when any door is open and im lost on what im missing here. also no parking light, white wire from alarm to lt blue wire pin#8. i think im getting stressed and missing a simple step. thanks for any help...
12/12 GMC savana cargo van with aps-25c
Replies:
Posted By: offroadzj
Date Posted: February 21, 2013 at 1:06 PM
Ready remote shows this for the door trigger:
Door Trigger gray/black (ajar); tan (open) - BCM, pink plug, pin 10; gray plug, pin 23
Notes: The BCM (Body Control Module) is under the passenger dash.
Maybe try seeing what the gray/black wire reads with each door open?
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: mbee1
Date Posted: February 21, 2013 at 2:32 PM
same thing, only drivers door. instead of white wire from alarm, i used purple to trigger the dome light(+) to activate alarm. so know any door turns on dome light and its triggered.
Posted By: offroadzj
Date Posted: February 21, 2013 at 3:06 PM
Yup, that should work fine. The only thing you have to remember is that the alarm will not be active for the doors until the dome light shuts off.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: Mike M2
Date Posted: February 21, 2013 at 3:30 PM
I thought that if you use the dome wire positive on this van they won't work if you turn off the domelight at the switch? Might want to check.
Here's from Directechs...
| left Front Door Trigger |
gray/black (ajar); tan (open) |
- |
BCM, pink plug, pin 10; gray plug, pin 23 |
|
The BCM (Body Control Module) is under the passenger dash. | |
| Right Front Door Trigger |
tan/white |
- |
BCM, pink plug, pin 8 |
|
The BCM (Body Control Module) is under the passenger dash. | |
| Left Rear Door Trigger |
dk. blue/white |
- |
BCM, pink plug, pin 15 |
|
The BCM (Body Control Module) is under the passenger dash. | |
| Right Rear Door Trigger |
yellow/black |
- |
BCM, pink plug, pin 14 |
|
The BCM (Body Control Module) is under the passenger dash. | |
| Dome Supervision |
gray/black or dk. blue/white |
+ |
BCM, white plug, pin 5 |
|
The BCM (Body Control Module) is under the passenger dash. | |
| Trunk/Hatch Pin |
pink/black |
- |
BCM, pink plug, pin 12 | ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: offroadzj
Date Posted: February 21, 2013 at 3:55 PM
And that is exactly why I wish I could get Directechs access again... but the purchase requirements to get access are next to impossible for a small shop like mine to do.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: mbee1
Date Posted: February 22, 2013 at 7:57 AM
yes , alarm wont activate untill dome light shuts off. lucky for me customer likes it. he was just happy that i installed power door lock on the vech. its his work van and the main problem he had was no door locks. thanks for everyones help.
Posted By: offroadzj
Date Posted: February 22, 2013 at 8:58 AM
As Mike posted, test to make sure they work with the dome light turned off. The domelight wire may not be active if it is turned off and therefore would not trigger the alarm.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|