Print Page | Close Window

2007 honda fit disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133808
Printed Date: June 15, 2024 at 8:49 AM


Topic: 2007 honda fit disarm

Posted By: danc75
Subject: 2007 honda fit disarm
Date Posted: March 08, 2013 at 3:57 PM

Can anybody tell me if i need a certain resistance to hook up to the disarm wires on this car from a prostart or will just a neg. pulse do the job

thx

Dan




Replies:

Posted By: metz35
Date Posted: March 08, 2013 at 4:13 PM
Color:white (driver door key cylinder)
Polarity:-
Location:driver kick, white 23 pin plug, pin 11
View Image/Note



Posted By: Mike M2
Date Posted: March 08, 2013 at 4:23 PM

Diode isolate it....

posted_image



-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: danc75
Date Posted: March 08, 2013 at 4:39 PM
where would i get diodes, i am in a small town so my options are limited lol



Posted By: howie ll
Date Posted: March 08, 2013 at 4:52 PM
Mouser, Farnell Radio Shack on line.
Any TV repair shops in town?

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: danc75
Date Posted: March 08, 2013 at 7:14 PM

ahh, forgot about a tv repair shop, i`ll go there

thx


Print Page | Close Window