2013 dodge dart 5904/evo no start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134494
Printed Date: May 11, 2024 at 12:17 AM
Topic: 2013 dodge dart 5904/evo no start
Posted By: Raymond4646
Subject: 2013 dodge dart 5904/evo no start
Date Posted: July 07, 2013 at 11:55 AM
Evo is programed and working but when attempting to rs via the 5904 it only clicks the internal relays. However if I try to remote start with the option of pressing the factory keyless entry remote it will rs but once disarmed it will shutdown the vehicle. The option for rs shutdown when door is opened is not activated on the evo.
I tagged only the wires the evo specified on the 5904. Of course theres the remaining heavy gauge wires remaining. Any assistance would be appreciated.
Replies:
Posted By: dasbogie
Date Posted: July 07, 2013 at 12:27 PM
is the viper set to manual transmission mode?
is the neutral safety switch plugged in and turned on?
-------------
Advanced
Posted By: Raymond4646
Date Posted: July 07, 2013 at 12:30 PM
Vehicle is in automatic mode and neutral saftey switch is plugged in and switch is turned on.
Posted By: dasbogie
Date Posted: July 07, 2013 at 3:39 PM
which heavy gauge wires do you have remaining or which did you connect?
-------------
Advanced
Posted By: Raymond4646
Date Posted: July 07, 2013 at 5:22 PM
All the 12volt inputs to the 5904. The other half of the starter wire and accessory wires are not tagged
Posted By: dasbogie
Date Posted: July 07, 2013 at 9:17 PM
Is tach signal programmed to viper? When you use the viper does it try to remote start or does it immediately flash parking light error code?
-------------
Advanced
|