pke on 2011 dodge ram 1500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134586
Printed Date: June 12, 2024 at 11:24 AM
Topic: pke on 2011 dodge ram 1500
Posted By: dbarenas
Subject: pke on 2011 dodge ram 1500
Date Posted: July 20, 2013 at 11:22 AM
could some one give me a ignition wiring diagram for 2011 dodge ram i would like toi install pke and usind dball as an immobilizer bay pass
Replies:
Posted By: dbarenas
Date Posted: July 20, 2013 at 4:55 PM
I would like to install a pke on 2011 dodge tam 1500 is it even possible i have a db all and i loke to use if as a bypass also the pke has a push button start i would appreciate if even just a wiring diagram for the ignition and acc i dont know where to tap the acc the way its working now is the db all is set up for remote start as soon as i send signal to the start wire it turns on i would like it to work as oem cause i need the ignition to be on to reset the oil change due error
Posted By: dbarenas
Date Posted: July 22, 2013 at 11:34 AM
would someone help me please im trying to install apke with a push button start im using the db all right now its working but i would like to used it like oem first push acc second push ign third is start but with the db all just pust start it starts but i don't det the acc mode or ignition mode i only have the pke hook up is just to one ignition which db all asked for and the two mux its working like a remote start problem is if schedule maintenance light up i cant reset it without taking the whole cover up then put the keys and i can't listened to the radio without starting the car so would anyone help me please
Posted By: offroadzj
Date Posted: July 22, 2013 at 1:11 PM
Are you putting your foot on the brake? You need to press the button without touching the brake in order to get ACC and IGN. This will most likely require connecting the PKE brake input directly to the brake switch (not through the DB-ALL)
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: dbarenas
Date Posted: July 22, 2013 at 3:23 PM
Db all brake switch wire is not even connected
Posted By: dbarenas
Date Posted: July 22, 2013 at 3:26 PM
On db all brake wire is only output it type 1 wire 2 wire
Posted By: dbarenas
Date Posted: July 22, 2013 at 3:30 PM
The pke brAke wire is on the brake switch and my foot is not on it i would like to know wher to tap the acc wire from the pke to the vehicle
Posted By: offroadzj
Date Posted: July 22, 2013 at 4:27 PM
All new Chrysler vehicles have a mux ignition system... there is no simple 12 volt Accessory, Ignition, etc. They are combined with the use of resistors. There is no way (as far as I know) of integrating the PKE directly to the ignition circuit without the use of the DB-ALL module.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: dbarenas
Date Posted: July 22, 2013 at 4:56 PM
So there is no way to get it to work like factory
Posted By: offroadzj
Date Posted: July 23, 2013 at 6:07 AM
Not any way I can think of...
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: pentavolvo
Date Posted: July 24, 2013 at 6:15 AM
What exactly are you trying to do? Add an aftermarket push button start?
Posted By: dbarenas
Date Posted: July 28, 2013 at 10:05 AM
yes i have a pke with push button start and came with remote start from china its working right now like a remote start i wanted it to work like oem fisrt push is acc then second push ignition then third with brake is the start i like it to work like that so on evic maintenance reset i could do it with taking the front panell and stick the oem keys any sudggestion
Posted By: pentavolvo
Date Posted: July 28, 2013 at 12:42 PM
Do u have manual for the push button start kit
Posted By: dbarenas
Date Posted: July 29, 2013 at 1:45 PM
yes its just that the win module doesn't have acc nor start wire were can i tap the acc so when i first push radio and other acc comes on also the ignition right now its controlled by db all as soon as i power the start wire every thing goes i could only listened to the radio while motor is running or after i shut it off then radio shuts of as soon as i opened the door please help im going crazy on this issue
|