anti grind with no starter wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135511
Printed Date: June 05, 2024 at 2:54 PM

Topic: anti grind with no starter wire

Posted By: mroy006
Subject: anti grind with no starter wire
Date Posted: December 10, 2013 at 5:54 PM

First time poster here

Just about ready to install my Avital 5303 on to my 2004 Malibu Maxx and im wondering about the starter kill/anti grind option. There is no starter wire used in my installation so how can this be accomplished? I know about the DEI 8618 relay but just confused how to use it in my case.

Replies:

Posted By: kreg357
Date Posted: December 10, 2013 at 6:58 PM

Here is the info on including this feature on your car from ReadyRemote :
Starter Purple (for starter kill only) (+) @ starter or underhood fuse box, white 68 pin plug, pin D12

A few thoughts...
Starter Kill isn't mandatory, just an optional feature. Implementing it on your car ( with no ignition Starter wire ) is
a bit of additional work. Your car already has built in Anti-Grind, so that feature isn't necessary. As for Starter Kill
as an anti-theft measure, you already have GM'S MUTLIPLEX IGNITION/ANTI-THEFT SYSTEM, the steering wheel
and transmission shifter are locked when the key is removed and you are adding an Avital alarm system.

-------------
Soldering is fun!

Posted By: mroy006
Date Posted: December 10, 2013 at 7:03 PM

Thank you for the detailed response. Didn't know about the built in anti grind so that works out great. And I won't bother with the starter kill then.