08 malibu ignition switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135637
Printed Date: April 29, 2024 at 7:12 AM

Topic: 08 malibu ignition switch

Posted By: ziggyb222
Subject: 08 malibu ignition switch
Date Posted: December 28, 2013 at 4:21 PM

Had a customer come in with her 08 Malibu with a starter installed from whoever...they used a key in the box...Starter works fine, but the trim ring around the key cylinder will not stay because the put the loop in where the cover goes...Is there smaller loops available??? Or how is everyone applying the loop antennas to these type of cars???

Replies:

Posted By: kreg357
Date Posted: December 28, 2013 at 4:39 PM

Loop antenna? "We don't need no stinking loop antenna!" ( Para-phrase quote from the movie, The Treasure of the Sierra Madre. )

posted_image

Sorry, couldn't help myself. If it's a preformed loop, you could try the older "wrap it yourself" wire style one.

-------------
Soldering is fun!

Posted By: buddholly
Date Posted: December 28, 2013 at 7:34 PM

I loop em and electrical tape them. Sometimes you have to get creative.

-------------

Posted By: ziggyb222
Date Posted: December 29, 2013 at 2:52 PM

Yes I know IData is the answer...but she does not want to spend another 100 bucks to fix it...Looking for a solution for her...cheap...and she is good looking...lol!!!!

Print Page | Close Window